top of page

| Whole Home Rewiring in Santa Ana, CA

Santa Ana has the oldest housing stock in Orange County. Its historic neighborhoods are filled with Craftsman bungalows, Spanish Revival homes, and Victorians, many built in the early 1900s. That makes Santa Ana one of the most common places in the county to find knob-and-tube wiring that still needs to be replaced.

​

CA C-10 License #1108912 | Certified Journeyman Electrician | Insured & Bonded | SPAN, Tesla & Lutron Certified

| Rewiring in Santa Ana: Quick Answers

| Who: Wilson Electric, a licensed C-10 electrical contractor (#1108912) based in Costa Mesa, serving Santa Ana and Orange County.

​

| What: Full and partial home rewiring, knob-and-tube and aluminum wiring replacement, grounding upgrades, and panel upgrades.

​

| Permits: Every rewire is permitted and inspected through the City of Santa Ana.

​

| Code: Built to the 2025 California Electrical Code, in effect statewide since January 1, 2026.

​

| Timeline: Most single-family homes take about one to two weeks of electrical work, plus inspections.

​

| Cost: Priced from an on-site evaluation with an itemized written estimate.

| Homes and Wiring in Santa Ana

Santa Ana incorporated in 1886 and grew into Orange County's urban center long before most surrounding cities existed. Historic neighborhoods like Floral Park, French Park, Wilshire Square, and Washington Square include homes from the early 1900s through the 1930s, and many still contain knob-and-tube or very old cloth-insulated wiring. Post-war neighborhoods added large numbers of 1950s homes with ungrounded circuits and small panels.

​

​

| Santa Ana Neighborhoods We Serve

 

| Floral Park
| French Park
| Wilshire Square
| Washington Square
| Heninger Park
| Downtown Santa Ana
| West Floral Park
| Park Santiago

| Rewiring Challenges in Santa Ana

| Knob-and-Tube in Historic Homes

​

Santa Ana's older homes are among the most likely in Orange County to still have active knob-and-tube wiring. It has no ground, its insulation deteriorates, and many insurers won't cover it.

 

 

 

| Preserving Historic Character

 

Plaster walls, original trim, and historic details deserve care. We plan wire routes to minimize openings and protect original finishes.

 

 

 

| Post-War Upgrades

 

Many 1950s homes need grounding, more circuits, and larger electrical panels to support modern living.

| Signs Your Santa Ana Home Needs Rewiring

Old wiring rarely fails all at once. It gives warning signs first. If you notice any of these in your Santa Ana home, it's time for an evaluation:

​

​

| A home inspector or insurance company flagging the electrical system


| Original wiring in a home that's 50 or more years old


| Plans to add an EV charger, heat pump, or solar on an older panel


| Breakers that trip often, or fuses that blow


| Lights that flicker or dim when appliances turn on


| Outlets or switch plates that feel warm, buzz, spark, or show scorch marks

 

​

Heat, sparking, or burning smells can mean a fire hazard. Turn off the affected circuit and have it inspected right away.

| What's Included in a Rewire in Santa Ana

Every Wilson Electric rewire in Santa Ana is permitted, inspected, and built to the current California Electrical Code. A typical whole home rewire includes:

​

| New copper branch-circuit wiring sized for modern loads


| New boxes, tamper-resistant outlets, and switches


| Proper equipment grounding throughout


| AFCI and GFCI protection where code requires it


| Dedicated circuits for the kitchen, laundry, bathrooms, HVAC, and major appliances


| Panel evaluation, with an upgrade when needed


| Permit, rough-in inspection, and final inspection


| Coordinated drywall and stucco patching


| A clearly labeled panel and your permit documentation

| Our Rewiring Process in Santa Ana

Our process is built to keep your Santa Ana home livable and your project on schedule:

​

​

1. On-site evaluation of your panel, wiring, access, and future plans.


2. Itemized written estimate with scope, schedule, and exclusions.


3. Permit pulled with the City of Santa Ana.


4. Floors and finishes protected; work areas set up.


5. Rough-in: new copper circuits, boxes, and grounding through targeted access points.


6. Rough-in inspection before walls are closed.


7. Finish: devices, fixtures, and protection installed; patching coordinated.


8. Final inspection, circuit testing, labeled panel, and walkthrough.

| Cost to Rewire a House in Santa Ana

Rewiring costs in Santa Ana vary with home size, number of stories, attic and crawlspace access, wall finishes, the number of circuits and devices, panel condition, and whether the work is part of a remodel. Because two homes of the same size can differ a lot in access and scope, we price every rewire from an on-site visit or stamped blueprints and give you an accurate estimate. A complete electrical rewire averages $17 to $22 per square foot.

| Why Santa Ana Homeowners Choose Wilson Electric

| Custom home specialists with more than 10 years of residential experience along the Orange County coast

​

| Owner-led: Taylor Wilson, Certified Journeyman Electrician, leads every project

​

| CA C-10 License #1108912, insured and bonded

​

| SPAN, Tesla, and Lutron certified for smart panels, EV charging, and lighting control

​

| Clear, itemized estimates and permits handled


| Protected floors, minimal wall openings, and clean job sites

| Rewiring FAQs for Santa Ana Homeowners

| Do historic Santa Ana homes have knob-and-tube wiring?


Many do. Santa Ana has some of the oldest homes in Orange County, and homes in neighborhoods like Floral Park, French Park, and Wilshire Square may still have active knob-and-tube wiring. An inspection will confirm what your home has.

​

| Can you rewire a historic Santa Ana home with plaster walls?


Yes. Wilson Electric routes new wiring through attics, crawlspaces, and existing chases wherever possible and makes small, targeted openings in plaster, followed by coordinated patching.

​

| Will my insurance cover a home with knob-and-tube wiring?


Many insurance companies won't write or renew policies on homes with active knob-and-tube wiring. Replacing it with a permitted rewire removes that issue. Check with your carrier for its specific requirements.

​

| How much does it cost to rewire a house in Santa Ana?


The cost to rewire a home in Santa Ana depends on square footage, number of stories, attic and crawlspace access, wall finishes like plaster or stucco, the number of circuits and devices, and whether the panel needs an upgrade. Wilson Electric provides a detailed, itemized written estimate after an on-site evaluation.

​

| Do I need a permit to rewire my house in Santa Ana?


Yes. Rewiring a home in Santa Ana requires an electrical permit and city inspections. Wilson Electric pulls the permit, schedules the rough-in and final inspections, and meets the inspector on site.

​

| How long does it take to rewire a house in Santa Ana?


Most single-family homes take about one to two weeks of electrical work, plus time for inspections and patching. Most homeowners stay in their homes during the project because we work room by room and restore power at the end of each day whenever possible.

​

| Will I need a panel upgrade when I rewire my Santa Ana home?


Not always, but many older homes have panels that are undersized or no longer recommended. We evaluate your panel during the estimate and can complete a main panel upgrade at the same time, which is usually more efficient than doing it separately.

| Rewiring in Nearby Cities

Wilson Electric also provides whole home rewiring in nearby communities:


| Whole Home Rewiring in Tustin
| Whole Home Rewiring in Costa Mesa
| Whole Home Rewiring in Irvine
| Whole Home Rewiring in Fountain Valley
| Whole Home Rewiring in Westminster


Learn more about whole home rewiring in Orange County
 

Schedule An On-Site or Virtual Estimate

bottom of page