Irvine is known for newer, master-planned neighborhoods, but some of its original villages are now 50 years old, and their electrical systems show it. Rewiring in Irvine usually means one of two things: replacing aging or aluminum wiring in the early villages, or upgrading circuits and capacity in newer homes for all-electric living.
​
CA C-10 License #1108912 | Certified Journeyman Electrician | Insured & Bonded | SPAN, Tesla & Lutron Certified
| Rewiring in Irvine: Quick Answers
| Who: Wilson Electric, a licensed C-10 electrical contractor (#1108912) based in Costa Mesa, serving Irvine and Orange County.
​
| What: Full and partial home rewiring, knob-and-tube and aluminum wiring replacement, grounding upgrades, and panel upgrades.
​
| Permits: Every rewire is permitted and inspected through the City of Irvine.
| Code: Built to the 2025 California Electrical Code, in effect statewide since January 1, 2026.
​
| Timeline: Most single-family homes take about one to two weeks of electrical work, plus inspections.
​
| Cost: Priced from an on-site evaluation with an itemized written estimate.
| Homes and Wiring in Irvine
Irvine incorporated in 1971, and its earliest villages, including University Park, Turtle Rock, Culverdale, and the first phases of Woodbridge, were built in the late 1960s and '70s. Homes from that period may have aluminum branch-circuit wiring and panels sized for much smaller loads. Northwood, Westpark, and later villages came in the 1980s and '90s, while the Great Park and Portola Springs neighborhoods are much newer.
​​​
​
| Irvine Neighborhoods We Serve
| University Park
| Turtle Rock
| Culverdale
| Woodbridge
| Northwood
| Westpark
| Deerfield
| College Park
| Rancho San Joaquin
| Rewiring Challenges in Irvine
| Aluminum Wiring in Early Villages
​
Some homes in Irvine's first villages were built during the period when aluminum branch wiring was used. We test, remediate, or replace it so your connections stay safe.
| HOA Requirements
Most Irvine neighborhoods are governed by HOAs with rules on exterior work, equipment placement, and contractor hours. We work within those requirements and coordinate approvals when exterior changes are involved.
| All-Electric Upgrades
Many Irvine homeowners are adding EV chargers, heat pumps, induction ranges, and solar with batteries. A partial rewire and panel upgrade are often needed to support that load safely.
| Signs Your Irvine Home Needs Rewiring
Old wiring rarely fails all at once. It gives warning signs first. If you notice any of these in your Irvine home, it's time for an evaluation:
​
​
| Plans to add an EV charger, heat pump, or solar on an older panel
| Breakers that trip often, or fuses that blow
| Lights that flicker or dim when appliances turn on
| Outlets or switch plates that feel warm, buzz, spark, or show scorch marks
| A burning or "hot plastic" smell with no obvious source
| Two-prong, ungrounded outlets
​
​
Heat, sparking, or burning smells can mean a fire hazard. Turn off the affected circuit and have it inspected right away.
| What's Included in a Rewire in Irvine
Every Wilson Electric rewire in Irvine is permitted, inspected, and built to the current California Electrical Code. A typical whole home rewire includes:
​
​
| New copper branch-circuit wiring sized for modern loads
| New boxes, tamper-resistant outlets, and switches
| Proper equipment grounding throughout
| AFCI and GFCI protection where code requires it
| Dedicated circuits for the kitchen, laundry, bathrooms, HVAC, and major appliances
| Panel evaluation, with an upgrade when needed
| Permit, rough-in inspection, and final inspection
| Coordinated drywall and stucco patching
| A clearly labeled panel and your permit documentation
| Our Rewiring Process in Irvine
Our process is built to keep your Irvine home livable and your project on schedule:
​
​
1. On-site evaluation of your panel, wiring, access, and future plans.
2. Itemized written estimate with scope, schedule, and exclusions.
3. Permit pulled with the City of Irvine.
4. Floors and finishes protected; work areas set up.
5. Rough-in: new copper circuits, boxes, and grounding through targeted access points.
6. Rough-in inspection before walls are closed.
7. Finish: devices, fixtures, and protection installed; patching coordinated.
8. Final inspection, circuit testing, labeled panel, and walkthrough.
| Cost to Rewire a House in Irvine
Rewiring costs in Irvine vary with home size, number of stories, attic and crawlspace access, wall finishes, the number of circuits and devices, panel condition, and whether the work is part of a remodel. Because two homes of the same size can differ a lot in access and scope, we price every rewire from an on-site visit and give you an complete estimate. The average cost of a complete electrical rewire ranges from $17 to $22 per square foot.
| Why Irvine Homeowners Choose Wilson Electric
| Custom home specialists with more than 10 years of residential experience along the Orange County coast
​
| Owner-led: Taylor Wilson, Certified Journeyman Electrician, leads every project
​
| CA C-10 License #1108912, insured and bonded
​
| SPAN, Tesla, and Lutron certified for smart panels, EV charging, and lighting control
​
| Clear, itemized estimates and permits handled
| Protected floors, minimal wall openings, and clean job sites
| Rewiring FAQs for Irvine Homeowners
| Do Irvine homes have aluminum wiring?
Some do. Homes in Irvine's earliest villages, built in the late 1960s and early '70s, may have aluminum branch-circuit wiring. It can be remediated with approved connectors or replaced with copper. Wilson Electric can inspect your home and explain both options.
​
| Do newer Irvine homes ever need rewiring?
Full rewires are less common in newer Irvine homes, but partial rewires, added circuits, and panel upgrades are common when homeowners add EV chargers, heat pumps, solar, or remodel kitchens and bathrooms.
​
| Will my Irvine HOA need to approve electrical work?
Interior rewiring usually doesn't need HOA approval, but exterior changes like a new panel location or service equipment may. Wilson Electric can help you understand what to submit to your HOA.
​
| How much does it cost to rewire a house in Irvine?
The cost to rewire a home in Irvine depends on square footage, number of stories, attic and crawlspace access, wall finishes like plaster or stucco, the number of circuits and devices, and whether the panel needs an upgrade. Wilson Electric provides a detailed, itemized written estimate after an on-site evaluation.
​
| Do I need a permit to rewire my house in Irvine?
Yes. Rewiring a home in Irvine requires an electrical permit and city inspections. Wilson Electric pulls the permit, schedules the rough-in and final inspections, and meets the inspector on site.
​
| How long does it take to rewire a house in Irvine?
Most single-family homes take about one to two weeks of electrical work, plus time for inspections and patching. Most homeowners stay in their homes during the project because we work room by room and restore power at the end of each day whenever possible.
​
| Will I need a panel upgrade when I rewire my Irvine home?
Not always, but many older homes have panels that are undersized or no longer recommended. We evaluate your panel during the estimate and can complete a main panel upgrade at the same time, which is usually more efficient than doing it separately.
| Rewiring in Nearby Cities
Wilson Electric also provides whole home rewiring in nearby communities:
​
| Whole Home Rewiring in Tustin
| Whole Home Rewiring in Costa Mesa
| Whole Home Rewiring in Newport Beach
| Whole Home Rewiring in Lake Forest
| Whole Home Rewiring in Santa Ana

