top of page

| Whole Home Rewiring in Westminster, CA

Westminster has a large inventory of 1950s and '60s homes, many still on their original electrical systems. As families remodel, add rooms, and add EV chargers and new appliances, older wiring and small panels are often the first thing that needs to change.

 

CA C-10 License #1108912 | Certified Journeyman Electrician | Insured & Bonded | SPAN, Tesla & Lutron Certified

| Rewiring in Westminster: Quick Answers

| Who: Wilson Electric, a licensed C-10 electrical contractor (#1108912) based in Costa Mesa, serving Westminster and Orange County.

​

| What: Full and partial home rewiring, knob-and-tube and aluminum wiring replacement, grounding upgrades, and panel upgrades.

​

| Permits: Every rewire is permitted and inspected through the City of Westminster.

​

| Code: Built to the 2025 California Electrical Code, in effect statewide since January 1, 2026.

 

| Timeline: Most single-family homes take about one to two weeks of electrical work, plus inspections.


| Cost: Priced from an on-site evaluation with an itemized written estimate.

| Homes and Wiring in Westminster

Westminster incorporated in 1957, and much of its housing was built during the 1950s and '60s building boom. Many homes still have original two-wire ungrounded circuits, cloth or early plastic-sheathed cable, and 60- to 100-amp panels. Older additions and garage conversions sometimes have wiring that was never permitted, which a rewire corrects.

​

 

| Westminster Neighborhoods We Serve

 

| Little Saigon area
| Westminster Village
| Midway City area
| Bolsa Chica area
| Westminster Mall area
| Sigler Park area

| Rewiring Challenges in Westminster

| Unpermitted Past Work

​

Older additions and garage conversions in some Westminster homes have wiring that was never permitted or inspected. A rewire brings everything up to code and onto a permit record.
 

 

 

| Mid-Century Wiring

 

Original 1950s and '60s circuits often lack grounding and adequate capacity. We replace them with modern copper circuits and proper protection.

 

 

 

| Multigenerational Households

 

Larger households mean more appliances and more electrical load. We size circuits and panels to match how your family actually uses your home.

| Signs Your Westminster Home Needs Rewiring

Not sure if your Westminster home needs rewiring? Watch for these signs:

​

​

| Two-prong, ungrounded outlets


| Knob-and-tube, cloth-insulated, or aluminum branch-circuit wiring


| Too few outlets, and extension cords everywhere


| A home inspector or insurance company flagging the electrical system


| Original wiring in a home that's 50 or more years old


| Plans to add an EV charger, heat pump, or solar on an older panel

​

​

Heat, sparking, or burning smells can mean a fire hazard. Turn off the affected circuit and have it inspected right away.

| What's Included in a Rewire in Westminster

A complete rewire from Wilson Electric covers everything from the panel to the last outlet. In Westminster, that typically includes:

​

​

| New copper branch-circuit wiring sized for modern loads


| New boxes, tamper-resistant outlets, and switches


| Proper equipment grounding throughout


| AFCI and GFCI protection where code requires it


| Dedicated circuits for the kitchen, laundry, bathrooms, HVAC, and major appliances


| Panel evaluation, with an upgrade when needed


| Permit, rough-in inspection, and final inspection


| Coordinated drywall and stucco patching


| A clearly labeled panel and your permit documentation

| Our Rewiring Process in Westminster

Rewiring your Westminster home follows a clear, step-by-step process:

​

​

1. On-site evaluation of your panel, wiring, access, and future plans.


2. Itemized written estimate with scope, schedule, and exclusions.


3. Permit pulled with the City of Westminster.


4. Floors and finishes protected; work areas set up.


5. Rough-in: new copper circuits, boxes, and grounding through targeted access points.


6. Rough-in inspection before walls are closed.


7. Finish: devices, fixtures, and protection installed; patching coordinated.


8. Final inspection, circuit testing, labeled panel, and walkthrough.

| Cost to Rewire a House in Westminster

Rewiring costs in Westminster vary with home size, number of stories, attic and crawlspace access, wall finishes, the number of circuits and devices, panel condition, and whether the work is part of a remodel. Because two homes of the same size can differ a lot in access and scope, we price every rewire from an on-site visit and give you an accurate estimate. A complete electrical rewire costs $17 to $22 per square foot on average.

| The Wilson Electric Difference in Westminster

| Custom home specialists with more than 10 years of residential experience along the Orange County coast

​

| Owner-led: Taylor Wilson, Certified Journeyman Electrician, leads every project

​

| CA C-10 License #1108912, insured and bonded

​

| SPAN, Tesla, and Lutron certified for smart panels, EV charging, and lighting control

​

| Clear, itemized estimates and permits handled

​

| Protected floors, minimal wall openings, and clean job sites

| Rewiring FAQs for Westminster Homeowners

| Do 1950s and '60s Westminster homes need rewiring?


Many do. Homes from this era often have ungrounded circuits, deteriorating insulation, and undersized panels. An on-site evaluation will show whether a full rewire, partial rewire, or targeted repairs make sense.

​

| Can you fix unpermitted wiring from an old addition?


Yes. Wilson Electric can evaluate wiring in older additions and garage conversions and bring it up to current code under a permit, so it's documented and inspected.

​

| Do you serve Midway City and nearby areas?


Yes. Wilson Electric serves Westminster and nearby communities, including Midway City and the Bolsa Chica area.

​

| How much does it cost to rewire a house in Westminster?


The cost to rewire a home in Westminster depends on square footage, number of stories, attic and crawlspace access, wall finishes like plaster or stucco, the number of circuits and devices, and whether the panel needs an upgrade. Wilson Electric provides a detailed, itemized written estimate after an on-site evaluation.

​

| Do I need a permit to rewire my house in Westminster?


Yes. Rewiring a home in Westminster requires an electrical permit and city inspections. Wilson Electric pulls the permit, schedules the rough-in and final inspections, and meets the inspector on site.

​

| How long does it take to rewire a house in Westminster?


Most single-family homes take about one to two weeks of electrical work, plus time for inspections and patching. Most homeowners stay in their homes during the project because we work room by room and restore power at the end of each day whenever possible.

​

| Will I need a panel upgrade when I rewire my Westminster home?


Not always, but many older homes have panels that are undersized or no longer recommended. We evaluate your panel during the estimate and can complete a main panel upgrade at the same time, which is usually more efficient than doing it separately.

| Rewiring in Nearby Cities

Wilson Electric also provides whole home rewiring in nearby communities:

​


• Whole Home Rewiring in Huntington Beach
• Whole Home Rewiring in Fountain Valley
• Whole Home Rewiring in Seal Beach
• Whole Home Rewiring in Santa Ana


Learn more about whole home rewiring in Orange County

Schedule An On-Site or Virtual Estimate

bottom of page