Fountain Valley is a city of well-kept single-family homes, most built in the 1960s and '70s. Those homes are now 50 to 60 years old, and many still have their original wiring and panels. Rewiring is one of the smartest long-term investments a Fountain Valley homeowner can make.
​
CA C-10 License #1108912 | Certified Journeyman Electrician | Insured & Bonded | SPAN, Tesla & Lutron Certified
| Rewiring in Fountain Valley: Quick Answers
| Who: Wilson Electric, a licensed C-10 electrical contractor (#1108912) based in Costa Mesa, serving Fountain Valley and Orange County.
​
| What: Full and partial home rewiring, knob-and-tube and aluminum wiring replacement, grounding upgrades, and panel upgrades.
​
| Permits: Every rewire is permitted and inspected through the City of Fountain Valley.
​
| Code: Built to the 2025 California Electrical Code, in effect statewide since January 1, 2026.
​
| Timeline: Most single-family homes take about one to two weeks of electrical work, plus inspections.
​
| Cost: Priced from an on-site evaluation with an itemized written estimate.
| Homes and Wiring in Fountain Valley
Fountain Valley incorporated in 1957 and was largely built out over the next two decades with single-family tract homes. Many of these homes have original two-wire circuits without ground, panels sized for much smaller loads, and in some cases aluminum branch-circuit wiring from the late 1960s and early '70s.
​​​
​
​
| Fountain Valley Neighborhoods We Serve
​
| Mile Square Park area
| Green Valley
| Fountain Valley Estates
| Harbor Boulevard corridor
| Warner-Brookhurst area
| Rewiring Challenges in Fountain Valley
| Original 1960s–'70s Wiring
​
Most Fountain Valley homes are single-story or two-story tract homes with accessible attics, which makes them well-suited to efficient, low-disruption rewires.
| Aluminum Wiring
​
Homes built in the late 1960s to early '70s may have aluminum branch wiring. We identify it and recommend remediation or replacement.
| Growing Electrical Demand
EV chargers, heat pumps, and kitchen remodels are pushing many Fountain Valley panels past their limits. We size your rewire and panel for what you plan to add.
| Signs Your Fountain Valley Home Needs Rewiring
Old wiring rarely fails all at once. It gives warning signs first. If you notice any of these in your Fountain Valley home, it's time for an evaluation:
​
​
| Original wiring in a home that's 50 or more years old
| Plans to add an EV charger, heat pump, or solar on an older panel
| Breakers that trip often, or fuses that blow
| Lights that flicker or dim when appliances turn on
| Outlets or switch plates that feel warm, buzz, spark, or show scorch marks
| A burning or "hot plastic" smell with no obvious source
​
​
Heat, sparking, or burning smells can mean a fire hazard. Turn off the affected circuit and have it inspected right away.
| What's Included in a Rewire in Fountain Valley
Every Wilson Electric rewire in Fountain Valley is permitted, inspected, and built to the current California Electrical Code. A typical whole home rewire includes:
​
​
| New copper branch-circuit wiring sized for modern loads
| New boxes, tamper-resistant outlets, and switches
​
| Proper equipment grounding throughout
​
| AFCI and GFCI protection where code requires it
​
| Dedicated circuits for the kitchen, laundry, bathrooms, HVAC, and major appliances
​
| Panel evaluation, with an upgrade when needed
​
| Permit, rough-in inspection, and final inspection
​
| Coordinated drywall and stucco patching
​
| A clearly labeled panel and your permit documentation
| Our Rewiring Process in Fountain Valley
Our process is built to keep your Fountain Valley home livable and your project on schedule:
​
​
1. On-site evaluation of your panel, wiring, access, and future plans.
2. Itemized written estimate with scope, schedule, and exclusions.
3. Permit pulled with the City of Fountain Valley.
4. Floors and finishes protected; work areas set up.
5. Rough-in: new copper circuits, boxes, and grounding through targeted access points.
6. Rough-in inspection before walls are closed.
7. Finish: devices, fixtures, and protection installed; patching coordinated.
8. Final inspection, circuit testing, labeled panel, and walkthrough.
| Cost to Rewire a House in Fountain Valley
Rewiring costs in Fountain Valley vary with home size, number of stories, attic and crawlspace access, wall finishes, the number of circuits and devices, panel condition, and whether the work is part of a remodel. Because two homes of the same size can differ a lot in access and scope, we price every rewire from an on-site visit or stamped blueprints to give you an accurate up-front estimate. Complete electrical rewiring projects range from $17 to $22 per square foot on average.
| Why Fountain Valley Homeowners Choose Wilson Electric
| Custom home specialists with more than 10 years of residential experience along the Orange County coast
​
| Owner-led: Taylor Wilson, Certified Journeyman Electrician, leads every project
​
| CA C-10 License #1108912, insured and bonded
​
| SPAN, Tesla, and Lutron certified for smart panels, EV charging, and lighting control
​
| Clear, itemized estimates and permits handled
​
| Protected floors, minimal wall openings, and clean job sites
| Rewiring FAQs for Fountain Valley Homeowners
| Are Fountain Valley homes old enough to need rewiring?
Many are. Most Fountain Valley homes were built in the 1960s and '70s, and many still have original ungrounded wiring and undersized panels. An evaluation will show whether a full rewire, partial rewire, or targeted upgrades make sense.
​
| Do Fountain Valley homes have aluminum wiring?
Some homes built in the late 1960s and early '70s do. Aluminum branch wiring can overheat at connections. Wilson Electric can inspect your home and remediate or replace it.
​
| Is Wilson Electric close to Fountain Valley?
Yes. Wilson Electric is based in neighboring Costa Mesa, just minutes from Fountain Valley.
​
| How much does it cost to rewire a house in Fountain Valley?
The cost to rewire a home in Fountain Valley depends on square footage, number of stories, attic and crawlspace access, wall finishes like plaster or stucco, the number of circuits and devices, and whether the panel needs an upgrade. Wilson Electric provides a detailed, itemized written estimate after an on-site evaluation.
​
| Do I need a permit to rewire my house in Fountain Valley?
Yes. Rewiring a home in Fountain Valley requires an electrical permit and city inspections. Wilson Electric pulls the permit, schedules the rough-in and final inspections, and meets the inspector on site.
​
| How long does it take to rewire a house in Fountain Valley?
Most single-family homes take about one to two weeks of electrical work, plus time for inspections and patching. Most homeowners stay in their homes during the project because we work room by room and restore power at the end of each day whenever possible.
​
| Will I need a panel upgrade when I rewire my Fountain Valley home?
Not always, but many older homes have panels that are undersized or no longer recommended. We evaluate your panel during the estimate and can complete a main panel upgrade at the same time, which is usually more efficient than doing it separately.
| Rewiring in Nearby Cities
Wilson Electric also provides whole home rewiring in nearby communities:
​
| Whole Home Rewiring in Huntington Beach
| Whole Home Rewiring in Costa Mesa
| Whole Home Rewiring in Westminster
| Whole Home Rewiring in Santa Ana

