Santa Ana has some of the oldest homes in Orange County, especially in historic neighborhoods like Floral Park, French Park and Washington Square. Many still have parts of their original electrical system. When we add a subpanel to one of these homes, the bigger question is usually what the rest of the system looks like, including the service, the panel and any remaining knob-and-tube wiring.
| Santa Ana Subpanels: Quick Answers
| Who: Wilson Electric, a licensed C-10 electrical contractor (#1108912) based in Costa Mesa, serving Santa Ana.
​
| Most common Santa Ana projects: Floral Park Home With an ADU; Subpanel as Part of a Rewire; Mid-Century Homes With Small Services.
​
| Key fact: A subpanel adds breaker space, not capacity. We confirm your service has room with a load calculation.
​
| Permits: Permitted and inspected through the City of Santa Ana Building Safety Division.
​
| Code: The 2025 California Electrical Code, in effect statewide since January 1, 2026.
​
| Cost: An itemized written estimate after we see your main panel and the route.
| Why Santa Ana Homes Add Subpanels
Floral Park and West Floral Park are known for 1920s and 1930s homes on large lots. French Park and Downtown include Victorian-era and early 20th-century houses. Many have been updated in stages, so it is common to find a modern panel feeding original wiring, or a newer subpanel added to an outdated main. Santa Ana also has many ADUs under construction, and a large number of mid-century homes with small services.
​
| Santa Ana Neighborhoods We Serve
| Floral Park
| West Floral Park
| French Park
| Washington Square
| Wilshire Square
| Heninger Park
| Park Santiago
| Morrison Park
| Subpanel Projects We See in Santa Ana
| Floral Park Home With an ADU
​
Large Floral Park lots are ideal for ADUs, but older services often need an upgrade first. We plan the service, the subpanel and the ADU emergency disconnect together.
| Subpanel as Part of a Rewire
​
When we rewire a historic home, we often add a subpanel for the new kitchen or the second floor, routing new wiring to protect original plaster and trim.
| Mid-Century Homes With Small Services
​
Santa Ana homes from the 1950s often have small services. We check whether a subpanel is enough or whether the service needs to be upgraded first.
| Do You Need a Subpanel or a Bigger Service?
Here is what many Santa Ana homeowners are not told: a 100-amp subpanel on a 100-amp service is still a 100-amp house. Subpanels solve a shortage of breaker spaces and long circuit runs. They do not solve a shortage of capacity. That is why our estimate starts with a load calculation under the California Electrical Code. You get a clear answer about which problem you actually have.
| What We Check at Your Santa Ana Home
| Remaining knob-and-tube or original wiring, and whether the service needs an upgrade first
​
| Feeder route and distance, and the wire size needed to limit voltage drop
​
| Panel location, working clearance and grounding
| Plans for EVs, batteries, heat pumps or other future loads
| Service size, panel condition and open breaker spaces
| How a Santa Ana Subpanel Installation Works
| Every Santa Ana subpanel we install follows the same steps:
1. We walk the house and the route the feeder will take.
2. We calculate your loads, including what you plan to add.
3. You get a written, itemized estimate.
4. We pull the permit. Filed with the City of Santa Ana Building Safety Division.
5. We install the feeder and panel, then move or add circuits.
6. We pass inspection and give you a labeled panel directory and permit records.
| Subpanel FAQs for Santa Ana Homeowners
| Can you add a subpanel to a historic Santa Ana home?
Yes. We evaluate the service, panel and existing wiring first, then plan the subpanel so it fits the home's layout and avoids unnecessary damage to original finishes.
​
| My Floral Park house still has knob-and-tube wiring. Should I add a subpanel?
A subpanel alone does not fix knob-and-tube wiring. We usually recommend a partial or full rewire, with a subpanel if it helps organize the new circuits.
​
| Does Santa Ana require permits for subpanels?
Yes. Subpanels require an electrical permit and inspection through the City of Santa Ana. We handle both.
​
| How long does a subpanel installation take in Santa Ana?
Most attached-garage or indoor subpanels take one to two days of electrical work, plus inspection. Detached buildings with trenching take longer.
​
| What does a subpanel cost in Santa Ana?
It depends on the panel size, the feeder distance and the route. We give you an itemized written estimate after we see your main panel and the route.
| Related Services and Nearby Cities
| Electrical Subpanel Installation in Orange County
| Whole Home Rewiring in Santa Ana
| Panel Upgrades in Santa Ana
​
| Subpanel Installation in Tustin
| Subpanel Installation in Costa Mesa
| Subpanel Installation in Irvine
| Subpanel Installation in Fountain Valley
| Subpanel Installation in Westminster

