top of page

| Whole Home Rewiring in Mission Viejo, CA

Mission Viejo's original master-planned neighborhoods date to the late 1960s and '70s, and those homes are now among the most likely in South County to need rewiring. Aging circuits, possible aluminum wiring, and rising electrical demand all point toward an upgrade.

 

CA C-10 License #1108912 | Certified Journeyman Electrician | Insured & Bonded | SPAN, Tesla & Lutron Certified

​

​

| Rewiring in Mission Viejo: Quick Answers

| Who: Wilson Electric, a licensed C-10 electrical contractor (#1108912) based in Costa Mesa, serving Mission Viejo and Orange County.


| What: Full and partial home rewiring, knob-and-tube and aluminum wiring replacement, grounding upgrades, and panel upgrades.


| Permits: Every rewire is permitted and inspected through the City of Mission Viejo.


| Code: Built to the 2025 California Electrical Code, in effect statewide since January 1, 2026.


| Timeline: Most single-family homes take about one to two weeks of electrical work, plus inspections.


| Cost: Priced from an on-site evaluation with an itemized written estimate.

| Homes and Wiring in Mission Viejo

Mission Viejo was developed by the Mission Viejo Company beginning in the mid-1960s and incorporated in 1988. Its earliest neighborhoods were built during the period when aluminum branch-circuit wiring was used in some homes. Many homes from the 1970s still have original panels and circuits. Later neighborhoods around Lake Mission Viejo and in the southern part of the city were built through the 1980s and '90s.

​

​

| Mission Viejo Neighborhoods We Serve

 

| Lake Mission Viejo area
| Deane Homes
| Casta del Sol
| Pacific Hills
| Madrid del Lago
| Aegean Hills
| Mission Viejo Country Club area

| Rewiring Challenges in Mission Viejo

| Aluminum Wiring in Early Neighborhoods

​

Some of Mission Viejo's original homes were built when aluminum branch wiring was in use. We identify it and remediate or replace it.

 

 

 

| Original 1970s Panels

 

Many homes still have original panels that are undersized or no longer recommended. We evaluate and upgrade them as part of a rewire.

 

 

 

| HOA Communities

 

Most Mission Viejo neighborhoods have HOAs. We coordinate any approvals needed for exterior work.

| Signs Your Mission Viejo Home Needs Rewiring

Not sure if your Mission Viejo home needs rewiring? Watch for these signs:

​

​

| Outlets or switch plates that feel warm, buzz, spark, or show scorch marks


| A burning or "hot plastic" smell with no obvious source


| Two-prong, ungrounded outlets


| Knob-and-tube, cloth-insulated, or aluminum branch-circuit wiring


| Too few outlets, and extension cords everywhere


| A home inspector or insurance company flagging the electrical system

​

​

Heat, sparking, or burning smells can mean a fire hazard. Turn off the affected circuit and have it inspected right away.

| What's Included in a Rewire in Mission Viejo

A complete rewire from Wilson Electric covers everything from the panel to the last outlet. In Mission Viejo, that typically includes:

​

​

| New copper branch-circuit wiring sized for modern loads


| New boxes, tamper-resistant outlets, and switches


| Proper equipment grounding throughout


| AFCI and GFCI protection where code requires it


| Dedicated circuits for the kitchen, laundry, bathrooms, HVAC, and major appliances


| Panel evaluation, with an upgrade when needed


| Permit, rough-in inspection, and final inspection


| Coordinated drywall and stucco patching


| A clearly labeled panel and your permit documentation

| Our Rewiring Process in Mission Viejo

Rewiring your Mission Viejo home follows a clear, step-by-step process:

​

​

1. On-site evaluation of your panel, wiring, access, and future plans.


2. Itemized written estimate with scope, schedule, and exclusions.


3. Permit pulled with the City of Mission Viejo.


4. Floors and finishes protected; work areas set up.


5. Rough-in: new copper circuits, boxes, and grounding through targeted access points.


6. Rough-in inspection before walls are closed.


7. Finish: devices, fixtures, and protection installed; patching coordinated.


8. Final inspection, circuit testing, labeled panel, and walkthrough.

| Cost to Rewire a House in Mission Viejo

Rewiring costs in Mission Viejo vary with home size, number of stories, attic and crawlspace access, wall finishes, the number of circuits and devices, panel condition, and whether the work is part of a remodel. Because two homes of the same size can differ a lot in access and scope, we price every rewire from an on-site visit or stamped blueprints and give you an accurate estimate. A complete electrical rewire costs $17 to $22 per square foot on average.

| The Wilson Electric Difference in Mission Viejo

| Custom home specialists with more than 10 years of residential experience along the Orange County coast


| Owner-led: Taylor Wilson, Certified Journeyman Electrician, leads every project


| CA C-10 License #1108912, insured and bonded


| SPAN, Tesla, and Lutron certified for smart panels, EV charging, and lighting control


| Clear, itemized estimates and permits handled


| Protected floors, minimal wall openings, and clean job sites

| Rewiring FAQs for Mission Viejo Homeowners

| Do older Mission Viejo homes have aluminum wiring?


Some do. Mission Viejo's earliest neighborhoods were built in the late 1960s and early '70s, when aluminum branch wiring was used in some homes. Wilson Electric can inspect and remediate or replace it.

​

| Do Mission Viejo homes need rewiring?


Many homes from the 1970s still have original wiring and panels. An evaluation will show whether a full rewire, partial rewire, or targeted upgrades make sense.

​

| Do you serve Casta del Sol and the Lake Mission Viejo area?


Yes. Wilson Electric serves all of Mission Viejo, including Casta del Sol, the Lake area, and the original Deane Homes neighborhoods.

​

| How much does it cost to rewire a house in Mission Viejo?


The cost to rewire a home in Mission Viejo depends on square footage, number of stories, attic and crawlspace access, wall finishes like plaster or stucco, the number of circuits and devices, and whether the panel needs an upgrade. Wilson Electric provides a detailed, itemized written estimate after an on-site evaluation.

​

| Do I need a permit to rewire my house in Mission Viejo?


Yes. Rewiring a home in Mission Viejo requires an electrical permit and city inspections. Wilson Electric pulls the permit, schedules the rough-in and final inspections, and meets the inspector on site.

​

| How long does it take to rewire a house in Mission Viejo?


Most single-family homes take about one to two weeks of electrical work, plus time for inspections and patching. Most homeowners stay in their homes during the project because we work room by room and restore power at the end of each day whenever possible.

​

| Will I need a panel upgrade when I rewire my Mission Viejo home?


Not always, but many older homes have panels that are undersized or no longer recommended. We evaluate your panel during the estimate and can complete a main panel upgrade at the same time, which is usually more efficient than doing it separately.

| Rewiring in Nearby Cities

Wilson Electric also provides whole home rewiring in nearby communities:


| Whole Home Rewiring in Laguna Hills
| Whole Home Rewiring in Lake Forest
| Whole Home Rewiring in Laguna Niguel
| Whole Home Rewiring in San Juan Capistrano
| Whole Home Rewiring in Aliso Viejo


Learn more about whole home rewiring in Orange County
 

Schedule An On-Site or Virtual Estimate

bottom of page