top of page

| Whole Home Rewiring in Laguna Hills, CA

Laguna Hills is filled with homes from the 1960s and '70s, from modest single-story homes to equestrian estates in Nellie Gail Ranch. Many still have original electrical systems that aren't built for today's loads.


CA C-10 License #1108912 | Certified Journeyman Electrician | Insured & Bonded | SPAN, Tesla & Lutron Certified

| Rewiring in Laguna Hills: Quick Answers

| Who: Wilson Electric, a licensed C-10 electrical contractor (#1108912) based in Costa Mesa, serving Laguna Hills and Orange County.


| What: Full and partial home rewiring, knob-and-tube and aluminum wiring replacement, grounding upgrades, and panel upgrades.


| Permits: Every rewire is permitted and inspected through the City of Laguna Hills.


| Code: Built to the 2025 California Electrical Code, in effect statewide since January 1, 2026.


| Timeline: Most single-family homes take about one to two weeks of electrical work, plus inspections.


| Cost: Priced from an on-site evaluation with an itemized written estimate.

| Homes and Wiring in Laguna Hills

Laguna Hills incorporated in 1991, but much of its housing was built in the 1960s and '70s. Homes from that period often have ungrounded circuits, undersized panels, and in some cases aluminum branch wiring. Nellie Gail Ranch features larger lots with barns, pools, and detached structures that need well-designed electrical systems.

​

​

| Laguna Hills Neighborhoods We Serve

​

| Nellie Gail Ranch
| Moulton Ranch area
| Laguna Hills Town Center area
| Westridge
| Oakbrook Village
| Sheep Hills area

| Rewiring Challenges in Laguna Hills

| Equestrian and Large-Lot Properties

​

Nellie Gail Ranch homes often include barns, arenas, pools, and guest houses with long circuit runs and subpanels. We design these systems for safety and capacity.

 

 

 

| 1960s–'70s Wiring

 

Original wiring in many Laguna Hills homes lacks grounding and adequate capacity. We replace it with modern copper circuits.

 

 

 

| Aluminum Wiring

 

Some homes from the late 1960s and early '70s have aluminum branch wiring that needs remediation or replacement.

| Signs Your Laguna Hills Home Needs Rewiring

Old wiring rarely fails all at once. It gives warning signs first. If you notice any of these in your Laguna Hills home, it's time for an evaluation:

​


| Too few outlets, and extension cords everywhere


| A home inspector or insurance company flagging the electrical system


| Original wiring in a home that's 50 or more years old


| Plans to add an EV charger, heat pump, or solar on an older panel


| Breakers that trip often, or fuses that blow


| Lights that flicker or dim when appliances turn on

​


Heat, sparking, or burning smells can mean a fire hazard. Turn off the affected circuit and have it inspected right away.

| What's Included in a Rewire in Laguna Hills

Every Wilson Electric rewire in Laguna Hills is permitted, inspected, and built to the current California Electrical Code. A typical whole home rewire includes:

​


| New copper branch-circuit wiring sized for modern loads


| New boxes, tamper-resistant outlets, and switches


| Proper equipment grounding throughout


| AFCI and GFCI protection where code requires it


| Dedicated circuits for the kitchen, laundry, bathrooms, HVAC, and major appliances


| Panel evaluation, with an upgrade when needed


| Permit, rough-in inspection, and final inspection


| Coordinated drywall and stucco patching


| A clearly labeled panel and your permit documentation
 

| Our Rewiring Process in Laguna Hills

Our process is built to keep your Laguna Hills home livable and your project on schedule:

​


1. On-site evaluation of your panel, wiring, access, and future plans.


2. Itemized written estimate with scope, schedule, and exclusions.


3. Permit pulled with the City of Laguna Hills.


4. Floors and finishes protected; work areas set up.


5. Rough-in: new copper circuits, boxes, and grounding through targeted access points.


6. Rough-in inspection before walls are closed.


7. Finish: devices, fixtures, and protection installed; patching coordinated.


8. Final inspection, circuit testing, labeled panel, and walkthrough.

| Cost to Rewire a House in Laguna Hills

Rewiring costs in Laguna Hills vary with home size, number of stories, attic and crawlspace access, wall finishes, the number of circuits and devices, panel condition, and whether the work is part of a remodel. Because two homes of the same size can differ a lot in access and scope, we price every rewire from an on-site visit and give you an itemized estimate.

| Why Laguna Hills Homeowners Choose Wilson Electric

| Custom home specialists with more than 10 years of residential experience along the Orange County coast


| Owner-led: Taylor Wilson, Certified Journeyman Electrician, leads every project


| CA C-10 License #1108912, insured and bonded


| SPAN, Tesla, and Lutron certified for smart panels, EV charging, and lighting control


| Clear, itemized estimates and permits handled


| Protected floors, minimal wall openings, and clean job sites

| Rewiring FAQs for Laguna Hills Homeowners

| Do Laguna Hills homes need rewiring?


Many Laguna Hills homes were built in the 1960s and '70s and still have original wiring and panels. An evaluation will show whether a full rewire, partial rewire, or targeted upgrades make sense.

​

| Can you wire barns and outbuildings in Nellie Gail Ranch?


Yes. Wilson Electric designs and installs subpanels and circuits for barns, guest houses, pools, and other outbuildings on large-lot properties.

​

| Do Laguna Hills homes have aluminum wiring?


Some homes built in the late 1960s and early '70s do. Wilson Electric can inspect your home and remediate or replace aluminum wiring.

​

| How much does it cost to rewire a house in Laguna Hills?


The cost to rewire a home in Laguna Hills depends on square footage, number of stories, attic and crawlspace access, wall finishes like plaster or stucco, the number of circuits and devices, and whether the panel needs an upgrade. Wilson Electric provides a detailed, itemized written estimate after an on-site evaluation.

​

| Do I need a permit to rewire my house in Laguna Hills?


Yes. Rewiring a home in Laguna Hills requires an electrical permit and city inspections. Wilson Electric pulls the permit, schedules the rough-in and final inspections, and meets the inspector on site.

​

| How long does it take to rewire a house in Laguna Hills?


Most single-family homes take about one to two weeks of electrical work, plus time for inspections and patching. Most homeowners stay in their homes during the project because we work room by room and restore power at the end of each day whenever possible.

​

| Will I need a panel upgrade when I rewire my Laguna Hills home?


Not always, but many older homes have panels that are undersized or no longer recommended. We evaluate your panel during the estimate and can complete a main panel upgrade at the same time, which is usually more efficient than doing it separately.

| Rewiring in Nearby Cities

Wilson Electric also provides whole home rewiring in nearby communities:


• Whole Home Rewiring in Laguna Niguel
• Whole Home Rewiring in Mission Viejo
• Whole Home Rewiring in Aliso Viejo
• Whole Home Rewiring in Lake Forest


Learn more about whole home rewiring in Orange County
 

Schedule An On-Site or Virtual Estimate

bottom of page